Pools are among the best ways to escape the intense Arizona summer heat. However, if you have a pool, you know it requires frequent maintenance to operate properly. Even if you take good care of your pool, it may still develop leaks. A Mesa pool leak detection service can help ensure that any leaks are detected and repaired properly so you can continue to enjoy your pool.

   

What Is Leak Detection For Your Swimming Pool?

Leak detection is a service that uses technology and specialized tools to find leaks in your pool. If you think your pool has a leak, pool leak detection is the first and most important step toward getting it fixed. Leaks can quickly worsen over time, so it’s important to identify the source of your leak and get it repaired right away so you and your family can enjoy your pool the way it was meant to be enjoyed. And we don’t want to scare you, but here are 10 scary facts about pool leaks to remember!

Even if you use your pool frequently, you may be unaware that it has developed a leak. Leaks can start small or occur in places that you don’t normally look. It’s important to keep an eye on your pool and its plumbing so you can detect leaks early on. The sooner you spot a leak, the better. That way, you can have a professional Mesa pool leak detection service come out and fix the leak before the problem gets worse.

It may be difficult to detect a leak, especially if it starts out small. Here are 5 signs that you might have a leak in your pool.

1)  Increased water bill without changing your habits. Has your water bill suddenly increased? Although your water bill may fluctuate with the seasons, you should keep an eye on your bill to see if the cost has spiked unexpectedly. If it has increased without you and your family changing your water habits, this may be a sign that you have a leak in your pool.

2)  Lifting of the hard-scapes around the pool. Leaks in your pool can cause water to get under the hardscape around your pool. This may result in shifting tiles or uneven pool surfaces, which can be unsightly and dangerous.

3)  Cracks in the surface of the pool. It is not uncommon for leaks to start out as cracks in the surface of your pool. Most of these cracks are superficial and aesthetic in nature, but if you wait too long to repair them, they can worsen and cause substantial leaks. Call in a qualified Mesa pool leak detection service right away if you see cracks in the surface of your pool. They will be able to repair those leaks and save you hundreds of dollars in costly repairs!

4)  Adding water to the pool more frequently. It is normal for pools to lose a bit of water through evaporation, especially during hotter months. Water loss due to evaporation should be minimal and hardly noticeable. However, if you find yourself adding water to the pool more frequently, this is a sign that you likely have a leak in your pool that is causing water to drain out of it. Frequently adding water can also cause algae to grow because the water takes time to become acclimated after it is chemically treated.

5)  Your pump is losing its prime. Like all household appliances, your pool’s pump and plumbing system will start failing as it ages. Depending on the quality of its installation, your pool pump can last anywhere from 8-15 years. Keep a close eye on your pump to note any signs of malfunction, and don’t wait to replace it before it’s too late. Make sure to have a backup pump in mind as your current pump approaches 8 years old. Replacing it before it fails can save you a leak emergency later on.

Do any of these signs sound familiar? If so, you may be dealing with a pool leak. Call us at (480) 794-0959 right away so we can help!
 

How Does The Pool Leak Detection Process Work?

If you have never had a pool before or are unfamiliar with leak detection, you may wonder how it works. When you hire a Mesa pool leak detection service, an expert will come to your location to carefully assess the state of your pool. From there, we get to work locating and repairing your leak so you can get back to enjoying your pool.

At Leak Science, we follow a simple three-step process for each service appointment. No two leaks are the same, but our streamlined process helps us locate and repair leaks as quickly and efficiently as possible.
 

Step 1: Diagnose

The first step in any leak detection process is to diagnose the problem. Our qualified technicians will spend some time with the client to understand the symptoms of the leak. We’ll run a full diagnostic test of several areas to determine possible areas where your leak may be forming. 

Step 2: Locate

After we’ve diagnosed the problem and determined where approximately the leak has formed, we use highly sophisticated ultrasound equipment to locate the exact source of the leak. Leaks usually occur in an area no bigger than 2 feet long and wide! Luckily, we have years of experience combing through hundreds of feet of plumbing, so we know exactly where to look to find your leak. 

Step 3: Repair

Once we’ve located your leak and marked it with an “X,” it’s time to get to work repairing it. Keep in mind we may have to remove some of the flagstone or concrete in and around your pool to access the leak. But don’t worry! We will restore your pool to its original condition so you don’t have to worry about hiring an additional contractor after we’re gone. In fact, we’re the only Mesa pool leak detection service that offers full pool restoration!

Want to see our pool restoration results? Click here to view some of our finished projects.

Related Article: DIY Vs Professional Leak Detection 
 

Areas In Your Swimming Pool Prone To Leaks

Leaks in your pool don’t just come from the plumbing used to supply your pool with its water. There are multiple areas that can cause problems for your pool. Here are some areas that are prone to leaks in your pool.

Plumbing

Do you know what area is the most prone to leaks? If you guessed the plumbing, you would be correct. Just like in your home, the plumbing can develop leaks as a result of the type of materials in the pipes, the age of the pipes, and the normal wear and tear from use. As your plumbing ages, it becomes more susceptible to leaks. 

Skimmers

Cracks can occur in the bottom of the skimmer or the pipe connected to it. Oftentimes, the area where the skimmer meets the pool surface begins to separate, allowing water to seep out. This gap can be caused by the normal expansion and contraction of the concrete. Sometimes it can also be caused by debris caught between the gap or inside a small crack. 

Returns

Leaks in the returns can occur due to a gasket, pipe leak, or a leak in the fitting itself. This is a common leak problem for pools.

Pool Lights

Did you know that even your pool lights can leak? Because the light is a fixture added to the pool, leaks can occur in the conduit line or where the light is affixed to the pool.

Pool Surface Areas

Though some cracks in the pool surface are cosmetic, others can lead to water leaks. These leaks can occur due to shifting and settling of the ground beneath the pool, erosion, or exposure to the elements. Even cosmetic cracks should be addressed by a professional to keep your pool working properly.