Archive for the ‘Uncategorized’ Category

How to Detect a Bathroom Leak

Posted on: November 27th, 2021 by admin No Comments

How to Detect a Bathroom Leak

Leak Science’s Guide Into Bathroom Leak Detection: How to Detect a Bathroom Leak Before It’s Too Late

Bathrooms, by their nature, are one of the most frequently used rooms in a household. Whether you’re flushing the toilet, brushing your teeth, or showering, you’re bound to heavily use the water and related units multiple times during the day. With this heavy usage comes a possibility of a malfunction, and especially a leak. Not only can leaks cause troublesome damage, but they can also lead to time-consuming and expensive repairs if they are not addressed right away. That’s why it’s important to know how to detect a bathroom leak. 

In this simple guide, you’ll learn about some of the most common areas for leaks in the bathroom. It’s important to check these areas routinely to look for signs of damage or leaks. The sooner you spot a leak and get it repaired, the better. If you wait too long to address this issue, the leak could get worse and cause even more damage. If you spot a leak inside of your bathroom, call Leak Science right away!

How to Detect a Bathroom Leak

Some leaks are tricky to spot, even if you think you know what you are looking for. That’s why we’ve provided this list of important areas to check for signs of leaks. Some leaks may be a minor issue repairable in a matter of minutes, but others can drain your water supply and your pockets. Even if you can find these leaks on your own, we recommend hiring a professional leak detection company to help you locate and repair pesky leaks. 

Here are some common signs of bathroom leaks, as well as areas you should check around the bathroom.

Listen for Dripping Sounds

One of the most obvious signs of a leak is the presence of a dripping sound. Usually, these sounds originate from bathtubs, showerheads, or faucets. However, you may not be able to hear dripping sounds that are coming from beneath your sink, so be sure to check all of your bathroom appliances on a regular basis. 

Take Note of Any Strange Smells

You’ve just cleaned your whole bathroom, but that funky smell you tried to get rid of is still there. Typically, strange smells are caused by the growth of mold and mildew. As water stagnates around appliances, mold can begin to grow, causing foul smells that seem to linger. If you notice a persistent, foul odor in your bathroom, it could indicate pooling or stagnant water. 

Check for Mold and Mildew

Seeing mildew in your shower doesn’t necessarily have to be a cause for concern. In fact, it’s fairly normal for mold and mildew to grow in areas that are moist and humid. (To prevent the growth of mold in showers and tubs, be sure to dry the surfaces after use, clean the tub frequently, and have proper ventilation in your bathroom.) What you need to look out for is the accumulation of mold and mildew on the bathroom walls which are not close to the shower or sink. Mold and mildew on that wall can be an indication of water leaking out of pipes that are behind the wall.

Check Ceilings for Signs of Damage

If you have a bathroom on another floor, check the ceiling of the room right under the bathroom. As a matter of fact, check other rooms too because the water can easily go even further than just to the room right under. Stained ceilings are a surefire indication that you have a leak. If you notice any water spots or discoloration, it’s time to call the professionals at Leak Science.

Check the Seals

When you’re searching for potential signs of leakage in the bathroom, always check the seals around your shower or tub. Broken seals can cause water to come in contact with your walls and floors, eventually leading to water damage. 

Check Your Flooring

Certain types of flooring materials, such as tile, are more suitable for bathroom environments because they are moisture resistant. Other floors, like hardwood or laminate, are more prone to deteriorating, rotting, curling, or cracking if exposed to water. Keep a close eye on the condition of your floors. If leaks or pooling water issues are not addressed properly, you can severely damage your floors.

Monitor the Drains

Drains are one of the most common areas for bathroom leaks. Whether it’s a shower drain or sink drain, water can leak slowly and it can be quite difficult to detect. To test if you have a leak caused by a faulty drain, fill your bathtub or a sink with water and wait an hour or two to see if the water level has decreased or stayed the same. If the water level has dropped, there’s obviously a leak—either in the bathtub/sink or a drain stopper.

Check the Tiles

This one can be applied to the seal part of the detection process as well. Tiles can leak if the silicone or grout is damaged. If your tiles are becoming moldy, it might be a time to fix the gaps in the silicone or grout. If not addressed in a timely manner, tiles can also become loose or fall off, leading to some expensive repairs. 

Inspect Your Toilet

The toilet is the most used of the amenities in the bathroom, which is why it’s crucial to inspect it regularly. If you notice unusually hissing or gurgling sounds or see that the water level is constantly fluctuating, you might have a leak. Another thing you can check is whether your toilet is moving. If it’s moving, the seal is probably broken. If not addressed soon, this could lead to major damage down the road.

Check the Sink (Especially Underneath!)

Most sink leaks occur where the pipes are. If you notice water running down the pipe to the flooring, it’s time to call the professionals. If you ignore this issue, the flooring below the sink can deteriorate over time.

Inspect Walls for Damage

Although we’ve mentioned damaged walls already, it’s worth bringing up again. Water stains, cracks, and chips from water damage are unsightly and expensive to fix. Walls typically won’t get damaged from the steamy showers, but rather from a leaky pipe behind the wall. If you notice your paint, wallpaper, or drywall is deteriorating at a rapid pace, you have a leak behind it. Address it immediately!

Pay Attention to Your Water Bill

If you haven’t noticed any of these signs, you might be in the clear. However, there are other extra measures you can take when trying to detect a bathroom leak. Most important of all is your water bill. If you notice a sudden and significant increase in your water bill, you could be facing a much bigger issue. Call a leak detection company right away so they can locate and fix hidden leaks in your home!

We hope these tips have helped you learn how to detect a bathroom leak. The most important thing to remember is to inspect your bathroom often and repair leaks immediately to save yourself time and money down the road. 

How to Detect a Bathroom Leak—Contact Leak Science Today!

Leak Science is the leading Phoenix water leak detection and repair company. We use highly sophisticated equipment, plus 15 years of industry experience, to quickly and accurately detect and repair leaks. We pride ourselves on quality workmanship, lasting results, and top-notch customer service. If you’re not sure how to detect a bathroom leak, we can help! Don’t hesitate to call Leak Science at 480-794-0959 or contact us online. No leak is too large or small for our team to handle. 

How to Prep Your Pool for Winter in Arizona

Posted on: October 26th, 2021 by admin No Comments

How to Prep Your Pool for Winter in Arizona

A Beginner’s Guide to Preparing a Pool for Colder Weather Conditions

Living in Arizona has quite a few perks—most notably, the weather! Central and southern Arizona have beautiful weather throughout most of the year (save for the scorching summers). Although in some northern regions it can get quite cold during the winter, most of Arizona has a mild winter. While some people may be a bit extreme and take a few dips during the colder seasons, most homeowners choose to close down their pools in the winter. That’s why it’s important to know how to prep your pool for winter in Arizona. 

When it comes time to close down your pool, you’ll want to make sure you understand the necessary steps. Our experts at Leak Science are here to help you learn how to prep your pool for winter in Arizona. 

If you have any questions or even need help fixing a leak before winter sets in, give us a call at 480-794-0959 or contact us online. We are happy to help prep your pool for wintertime.

Why it’s Important to Winterize Your Pool

As the weather gets cooler, you’ll use your pool less and less. But even if you aren’t using your pool, it still requires some care to keep it in good working order. Knowing how to prep your pool for winter in Arizona will help you save time, effort, and money in the long run. After all, your pool is a huge investment—you should protect it all year round!

Some may feel they can leave their pool open during the winter. But if you do, you have to be prepared to constantly take care of it throughout the season. If you don’t take care of your pool properly, bacteria can build up, leading to an uneven chemical balance and a filthy pool. Most homeowners don’t use their pools during the winter, so we recommend closing it down so your job is easier later down the road!

Knowing When to Start Closing Down Your Pool

Most parts of Central and Southern Arizona experience mild winters. In our experience, temperatures don’t typically start to dip below the 90s until October or November. Because of this, there is no huge rush to winterize your pool, but you should be ready to prep it in the fall. No two winters are the same, so don’t let an overnight freeze catch you by surprise. 

If you live in central or southern Arizona, we recommend to our clients and readers to start closing their pools down somewhere around mid-December. From our own experience, that’s the most ideal time frame when pool season should be officially over. If you wait too long, you risk freezing temperatures damaging your pool. If you live up north, you will want to close your pool down before the start of fall. It is not unusual for Northern Arizona to get snow as early as October, so be ready to prep your pool either in late September or early October.

What You Need to Do to Properly Close Your Pool Down

If you decide to close down the pool during the winter, there are a few steps you’ll need to take to make sure your pool is ready for the cold. One of the most important aspects of winterizing your pool is checking for leaks that you may have overlooked. This may just be the perfect time to prevent any further damage and repair anything that’s cracked or is leaking. Contact the professionals at Leak Science to inspect the pool before you officially close it down! We offer leak detection, repairs, and full pool restoration so that your pool functions properly all year round. 

Here is how to prep your pool for winter in Arizona. 

Winter Cleaning is a Must

Before you officially close down the pool, you must clean it thoroughly. You’re not going to use this pool for a few months, so we recommend scrubbing it down before you put the pool cover on. Be sure to remove all debris, scrub the tiles and the other surfaces, clear out algae, and clean the skimmer baskets out.

If You Don’t Have a Pool Cover, Invest in One!

This one is pretty self-explanatory. Invest in a pool cover if you don’t already have one because it’s going to save you time and trouble in the future. You don’t need a fancy automatic pool cover either—a standard winter or safety cover will do the trick.

Balance the pH Levels

When it comes time to winterize your pool, you’ll have to learn your chemistry! Balancing pH levels is important all year round, especially in the winter. If you don’t have someone taking care of your pool at all times—which most people don’t have—it should be a priority to master this step. Monitoring and adjusting the pH levels is an important step of the process when you’re not using your pool for a longer period of time. Make sure the chemicals are balanced every week.

Add Shock to the Pool

Shocking the pool is a good way of preventing bacteria from forming while it’s out of use. Shock gives your pool a clear blue appearance. You can shock your pool by adding chlorine or non-chlorine pool chemicals to kill off bacteria. 

Drain Water—But Not Fully!

This is an essential step. Drain your pool water, but only drain it below the skimmers. Anything below that level may end up being damaging to your pool.

Disconnect the Pumps and Heaters (and other Hoses Connected to the Pool)

After you’ve drained the pool water below the skimmers, it’s time to unplug the pump and heaters. When you’re done with this part of the job, clean and store all of the hoses and connectors from your pool.

Clean the Filters

Don’t forget your filters! Make sure to clean the filters and drain them out completely to prevent buildup.

Store All Pool Accessories Away

In order to prevent damage to your belongings, make sure to store all of your pool accessories away during the winter. Keep them in a dry place, such as the garage, pool box, or inside your home.

Why It’s Important To Detect Leaks And Repair Them During The Winter

Taking care of a swimming pool is a lot of work, even in the winter. However, you’ll want to know how to prep your pool for winter in Arizona so you can protect your investment and make sure it is functioning properly when summertime rolls around again. Part of this process involves detecting and repairing any leaks that may have sprung up during the summer.

Leaks can be hard to detect, which is why we advise our clients to call in a professional leak detection company to handle the job. There’s no better time than the wintertime to check for possible repairs. While you’re preparing for the winter pool closing, make sure to contact us so we can inspect your pool and repair leaks before they get out of hand. 

Need help winterizing your pool? Call Leak Science Today!

Leak Science is the only company in the Valley that’s going to manage the whole process for you. From finding a pool leak to restoring the swimming pool, we are there with you every step of the way!

If you have questions or want to learn more about how to prep your pool for winter in Arizona, contact us today! Our experts are here to help keep your pool in perfect shape for the next pool season. For questions or to schedule a leak detection appointment, call us at 480-794-0959 or contact us online.

5 Common Causes Of Pool Leaks

Posted on: October 19th, 2021 by admin No Comments

5 Common Causes of Pool Leaks

Even though you put a lot of effort into maintaining your pool, it will eventually need repairs. As each season passes, your pool gets subjected to harsh temperatures, extreme weather, and lots of use from the family. Because of this, it’s unavoidable that your pool may start to leak and need repairs. If you find yourself adding more than a quarter-inch of water per day or more than two inches of water per week, you may have a leak. In order to protect your pool, it’s important to know what the 5 common causes of pool leaks are.

Typically, pool leaks can be formed by one or more of the following issues:

 

Let’s dive into each issue so you can better understand the source of pool leaks. If you notice any of these problems with your own pool, make sure to call a professional leak detection company right away!

Mechanical Issues

If you have an automatic fill device on your pool, a drop in your pool’s water level may not be apparent. However, high water bills and a relentless fluctuating chemical imbalance can lead to an expensive “green pool” problem of excess algae growth, which can be an indicator of a leak problem.

If you have a vinyl liner pool, your pool skimmer may be where your leak is. Fortunately, it’s fairly easy to find and fix. The most obvious sign that your skimmer is leaking is that the water will drop to the bottom of the skimmer and the leak stops. To test this, either turn the pump off or close the skimmer valves and run the pump on drain only.

On our list of the 5 common causes of pool leaks, one that may be considered a pool owner’s worst fear is a leak in the skimmer pipe. Ripping up your pool deck and replacing the pipe is fortunately very rare. Signs of this being the case include

Related Topic: 10 Scary Facts About Pool Leaks

Structural Damage

Structure leaks due to structural damage can happen anywhere in your pool. If you can see a crack in your concrete or fiberglass pool then this would be the perfect place to investigate if you are losing water. Oftentimes, cracks in your pool start out small and are generally only cosmetic in nature. However, we recommend getting these cracks repaired right away. The longer you wait to repair them, the worse they get. This can lead to larger structural problems and expensive repair bills!

Additionally, it’s common for leaks to happen around fixtures such as lights and returns. Investigate these areas by using the dye test. You can correct this by filling the opening of the conduit in the back of the socket with putty or other caulking agents appropriate for your pool construction material. If you aren’t sure how to fix the leak or don’t have the right equipment, call a professional leak detection company to handle the job.

Related Topic: How To Find A Leak In A Pool

Plumbing

Underground leaks can be caused by corrosion or movements in the ground, damaging your underground plumbing or possibly puncturing the floor of your pool. If you suspect a leak in your pool’s plumbing, contact Leak Science right away. Finding a leak underground and under the decking requires expert help with specialized sonar equipment. Additionally, the longer you wait to fix the leak, the more expensive the damage and water loss becomes.

Leak Science is the only pool leak detection company that can fix and find your leak, and completely restore your pool to its original condition like nothing ever happened. We will replace any flagstone or concrete that we had to remove, leaving your pool looking like new! This means you won’t have to worry about hiring an additional contractor after we’re gone. 

Read more about Leak Science here!

Broken Pipes

Number 4 on our list of 5 common causes of pool leaks is broken pipes. Your pool’s plumbing system is complex, which unfortunately means that leaks can spring up in a variety of locations throughout the piping. This can include…

RETURN PIPES

When the pool and the pool return pipes settle in the ground at different rates, this almost always results in a leak where the return meets the pool wall. This type of leak is a very common leak location.

THE MAIN DRAIN

The main drain is one of the hardest and most complicated factors for finding leaks in pools. Since you should not completely drain a pool, it is very difficult to inspect the main drain without proper training or equipment. Main drains can leak around the fixture itself as well as through the suction pipe that connects to them. Additionally, the main drain can develop leaks in the hydrostatic relief valve. This is often caused when rust or a rock obstructs the valve from closing properly.

SKIMMER PIPE

Unfortunately, the underside of a pool skimmer connection point is hard to get to. Concrete pool skimmers are usually encased in concrete on all sides, making the connection point that much harder to get to without high-tech equipment and trained ears.

This is why it’s so important to hire a professional leak detection company. The various tests for the multiple reasons for leaks can be costly, all while you’re losing water and increasing your water bill. At Leak Science, we use professional sonar equipment and our 10+ years of industry knowledge to quickly and efficiently identify the source of your leak.

EQUALIZER LINE

Leaks in equalizer pipes are one of the most likely suspects with older swimming pools. The equalizer line in the pool is a non-pressurized pipe that connects from the main drain to the underside of the skimmer. Because it is usually found in older swimming pools, it is often left out of major renovations. Call your trusted leak detection company right away if you suspect you have a leak.

Loose or Broken Fittings

While breaks, cracks, or collapses in the pipe can happen anywhere, they are most likely to be where joint connections have been made. This is very common in both pools and spas and can be fixed easily if the location is easy as well.

Related Topic: Pros and Cons of Hiring A Leak Detection Company

How do I know if my pool is leaking?

Leaks are frustrating to deal with on your own. Sometimes they are obvious and easily spotted. Other times, they may build up slowly over time, leaving you with expensive water bills and costly repairs. Thankfully, there are some signs you can look for to know if your pool has sprung a leak.

If any of these signs sound familiar, contact us right away! We’re happy to help locate and resolve your leak so you can get back to enjoying your pool. 

5 Common Causes of Pool Leaks

Swimming pools offer much-needed relief from summertime heat and an opportunity to have fun with your friends and family. But if you own a pool, you know how much maintenance they require. In addition to keeping them clean, it’s important to inspect them for leaks. The earlier you detect signs of damage, the better!

Leaks can happen anywhere in your pool and at any time. You’ll want to catch and repair leaks as quickly as possible. Leaks waste your money and worsen over time, causing increasing damage and compromising the structural integrity of your pool. Watch for any signs of damage and early signs of a leak. If you are adding more water than you normally do from evaporation or splashing, or notice an increase in your water bill, get your pool inspected by a professional leak detection company as soon as possible.

DIY Vs Professional Leak Detection

Posted on: September 15th, 2021 by admin No Comments

DIY Vs Professional Leak Detection

Most of us, at some point in our lives, had to listen to those perfectly timed and annoying sounds of water dripping…and you couldn’t find the source of the leak. Some try to fix the leaks themselves and others opt for professional help. However we frame it, leaks are a constant threat to homeowners and renters everywhere. These leaks, if not properly detected and taken care of, can drain your pockets once you start receiving inflated water bills on a monthly basis. The average US home can waste almost 10,000 extra gallons of water per year just off those neglected leaks. If you think there’s a leak somewhere but you still cannot find it after you’ve inspected the whole house, it’s time to call a professional. 

Many homeowners like to take a Do-It-Yourself approach to fix leaks. But before you do, we encourage you to consult a professional leak detection company to get help. After all, there are many times when leaks are too complicated to deal with on your own. While you cannot avoid all the leaks, you can take steps to significantly reduce the damage to your home and your pockets. Water leak detection is an essential step in maintaining your plumbing. That’s why it’s important to detect the leaks early, whether with the help of professionals or on your own. 

If you think you have a leak in your home or swimming pool, call Leak Science at 480-794-0959 or fill out a form on our site and we’ll contact you promptly. Leak Science has you covered!

How to Detect Potential Leaks Inside Your Home or Pool

If you prefer a DIY approach to leak detection, there are a few signs you can watch out for that may indicate you have a leak in your home or your pool. Keep an eye out for these signs around your property:

No two leaks are the same, so you may notice one or several of these signs at once. Sometimes you don’t even notice leaks until the damage has set in! If that’s the case, be sure to call a professional right away. 

What You Can Do When You Think There’s a Leak on Your Property

First and foremost, when trying to fix a leak yourself, our advice would be to shut the water valves off in the house. Don’t be scared of water flooding your house—there’s always a way to shut the water off. You always have to shut the main valves and the ones connected to your other fixtures, such as sinks, toilets, and tubs. Main valves are usually next to the water meter while others are right where your other fixtures are. Either way, we are going to compare the use of professional services and if you’re a bit more adventurous, DIY ways of detecting possible leaks.

A Piece of Advice For Our Readers

Some of our readers, who are on the verge of a decision, may want to read this paragraph more carefully. If you spot easily fixable problems like leaky faucets, clogged drains, or toilets not flushing properly, some of the videos and instructions online are quite useful and doable. Anything else that takes more knowledge and is not easily detectable should be handled by trained professionals.

Pros of DIY Detecting and Fixing Leaks

If you’re a person who likes DIY home projects, this section is for you! We’ll detail some of the advantages and disadvantages of DIY leak repairs so you can decide if you’re ready to tackle your next home leak.

Save Money

The most obvious reason for DIY leak repair is to save money. Hiring professionals to detect and fix the leaks on your property can be expensive up front (but it will likely save you money in the long run). Keep in mind that if you fix the leak on your own, you may risk causing even more damage. 

YouTube Can Help

People these days learn all kinds of skills on the internet, especially on YouTube. There are plenty of educational videos on the internet that can show you how to do something by yourself. Repairing videos are some of the most popular ones. If you choose this method, be sure to watch credible videos and do a bit of your own research on leak repairs. If in doubt, call a professional!

More Independence and Self-Sufficiency

The skills you learn along the way help you throughout your whole life. Learning new skills can help you feel more confident about managing your home and pool instead of relying only on professionals for help. 

Cons of DIY Detecting and Fixing

So, fixing leaks on your own can save you money, teach you new skills, and help you to be more independent when it comes to maintaining your home. However, you should be aware of the drawbacks related to DIY leak repair. 

May Lead to More Damage

When you fix leaks on your own, you have to remember that there is a chance you may make a mistake and cause more damage than what the original leak was causing. You think you’ve done the job correctly when all of a sudden, you find yourself facing even more problems. Your property may be irreparable and the cost of fixing everything is now multiple times more than it was previously. 

Your Skills May be Limited

The skills you’ve acquired (if you are not a certified professional) may not be enough for the job at hand. A professional has years of experience in the field and can use the proper tools to get the job done right the first time. Your skills may suffice to fix small faucet leaks, but you should always leave the bigger jobs to the professionals.

Leak Is Not Accurately Determined

Sometimes when you think you’ve found the leak, the problem is much worse than you thought. You might be able to whip up a temporary fix, but only a professional can identify the leak from its source and stop it from springing up again.

Pros of Hiring a Professional 

There are some jobs best left to the professionals. Home and pool leaks can develop into serious problems that cause lots of money in repair bills down the line. Here are some of the benefits of trusting a professional leak detection company to solve your leaks. 

Save Money

You may have thought this reason wouldn’t appear here. Even though DIY repairs can save you money up front, hiring a professional will undoubtedly save you money in the long run. The equipment, knowledge, and experience professionals have will guarantee that you get your money’s worth. They do this every day, and they’ll take care of everything accordingly.

Reduce the Risk a DIY Method Poses

While that educational DIY video is really useful, some detections and fixes may be more complicated under the surface. Using trained professionals guarantees you that even those quick fixes are going to be permanently taken care of.

Time is Money

Professionals will quickly and effectively locate and repair your leaks. Even those easier fixes may take you twice the time it usually takes a trained professional. Your time is your money. Don’t spend it carelessly.

Cons of Hiring a Professional

Even though we recommend hiring a professional, there are some factors you want to consider before reaching out to a professional leak detection company.

Always Check The Company You’re Calling Beforehand

Whenever you hire a contractor, you run the risk of hiring someone unprofessional and negligent. Always check the people you’re hiring. Make sure to check local ratings and reviews. It also helps to get opinions from family members and friends who have used a specific company before. 

*Can Be More Expensive Than Repairing it Yourself

This is one of the most common causes of concern when hiring a contractor. Some companies just charge too much for the service needed and provided. If you want to get around that, Leak Science is the right leak detection company for you. We offer solutions that will save you a lot of money while doing the best possible job we can do. Properly fixed leaks by Leak Science will save you money down the road!

In the long run, we advise our readers to hire professionals like the experts at Leak Science. You will have peace of mind knowing that everything is properly taken care of. We understand there are always going to be those of you who wish to do some of these projects on your own. However, let us help with complicated leaks so you can rest assured that the problem is fixed the first time around. Protect yourself and your loved ones from future problems with one phone call. We are here to help!

Hire a Professional Leak Detection Company Today!

No leak is too big or too small for our team of experts. Leak Science is a veteran-owned and operated company. For over 15 years we have specialized in locating and repairing home and pool leaks. We are also the only leak detection company that also offers full pool restoration, meaning you won’t have to call in an additional contractor to fix your pool deck once we’re gone. If you have a pesky leak, contact us right away and we’ll get that detected and fixed for you! Call us now at 480-794-0959 or contact us online and we’ll contact you promptly. Trust the experts at Leak Science!

Maintaining Your Pool During Monsoon Season

Posted on: August 11th, 2021 by admin No Comments

Maintaining Your Pool During Monsoon Season

Despite the fact that Arizona’s environment is known for its dry heat, the Monsoon season is the one wildcard that drastically alters weather patterns. Monsoon season, which begins in mid-June and lasts until the end of September, brings high temperatures, high winds, and significant moisture to the valley. When all three of these factors occur at the same time, the result can be catastrophic—not only for your home, but also for your swimming pool.

After a Monsoon storm, it’s vital to inspect the state of your swimming pool. Your filtering system will work better if you remove any debris as soon as possible. In the water, large branches or other foreign objects will begin to disintegrate. If not addressed immediately, these particles will block your filtration system and may damage the pump. 

During the summer months, the Arizona monsoon season brings high winds and heavy rain, as well as debris, dirt, and the risk for pool overflow. Leak Science can help with maintaining and cleaning your pool so you can enjoy it all summer long. Read on to learn about how to maintain your pool during monsoon season.

Filtration Tips for Monsoon Season 

In the Phoenix area, most of the Monsoon activity happens in the afternoon and early evening. To avoid the build-up of sand and dirt in your pool water, reset your pool filtration system to operate during this window. You should also extend the operating time of your pool filter to make sure it cleans out any lingering dirt and debris.

The dust in the air will continue to permeate your pool water, but extended filtering will help to keep your pool water clean and healthy. You should also be aware that during the Monsoon season, your filtration system will require more maintenance and attention. This may necessitate more regular backwashing or even the total disassembly of the filter to ensure correct cleaning and alignment.

Other Pool Maintenance Tips for Monsoon Season 

During monsoon season, the skimmer basket and pump leaf baskets, in addition to the pool filter, might fill up faster. By regularly inspecting and emptying these baskets, you can help reduce the additional pressure on the pool filter and pump. Remember that when a basket fills with leaves and other debris, the water flow will stop. The pump will immediately burn out if this happens because water is the pump’s primary source of cooling. Your only alternative at that point is to replace the pump, which might be a costly fix.

After monsoon storms, super chlorinate 

After a dust storm, pools that use chlorine or an Ozone system for cleanliness should be hyper-chlorinated to help avoid algae growth. You can take a proactive approach by using a preventative algaecide and stain preventer before the storm hits. Even in the event of a dust storm, your pool equipment will have already been properly treated. Remember that algae grows on phosphates in your pool water, so it’s critical to keep the water chemistry in check during Monsoon season to avoid any algae problems.

Keep your water chemistry balanced

Water chemistry is critical whether you use a pool service or manage your own pool. Make sure your carbonated alkalinity is in the proper range (80–120 ppm), your pH is set correctly (recommended range is 7.4–7.6), and you have plenty of active chlorine on hand. An algaecide that isn’t based on copper can also be a helpful preventative step. 

Algaecide of this sort disrupts the cell membranes of algae, making chlorine destroy it easier. As part of the clean-up after the storm, be prepared to super chlorinate or shock your pool. This will kill microorganisms brought on by rain, dust, and debris. To eliminate the dirt, run your equipment for 24 hours or longer if necessary.

Prepare your filtration system to deal with the storm’s aftermath

Your filter will likely take a beating after a monsoon. The best way to prepare your filter is to clean its cartridges and grids so it can run as efficiently as possible. Expecting your filter to sufficiently clean the pool if it is already polluted may be frustrating, and it may even damage your filter and its components.

Do not drain the water from your pool ahead of time

Contrary to what most homeowners think, you should actually refrain from draining your pool before monsoon season. Keep your pool filled at its normal level, which should be near the center of the skimmer opening. This enables optimal water filtration and circulation throughout your system. However, be prepared to drain huge volumes of water if several inches of rain falls during a storm, especially if it reaches the top of your waterline on the tile (or, in the worst case, it overflows!). 

If nothing else, try to make sure your pool doesn’t overflow. Allowing water to reach the pool deck may cause damage to your deck or perhaps your house. Even if you have insurance, most warranties will not cover this type of damage.

You don’t have to cover your pool

When a monsoon storm approaches, your first instinct may be to cover your pool. The cover can help keep dirt and debris out of the pool during a storm. It won’t assist in heavy winds, and it may even make removing anything flown into the pool more difficult. After a storm, removing the pool cover usually dumps everything, so be sure to clean it thoroughly before removing it.

Trim your yard’s trees and bushes 

Trimming loose branches off of trees and bushes will protect both your home and your pool from damage. Additionally, this will minimize the amount of dirt and debris that will fall into your pool, making cleanup much easier. Also be sure to examine the health of larger trees near your house or near your pool. During a storm, some trees—particularly those with shallow roots—are prone to blowing over.

Keep your pool equipment safe

Before a storm, protect your equipment by turning off breakers or covering the equipment. Electrical surges are prevalent during monsoon storms, and they can harm your devices. Make sure all of the breakers in your equipment control panel are turned off. The light circuit or a separate breaker, not the pump circuit, is used to control most automation systems.

Have sufficient drainage in your yard

If you have experienced monsoons before, you know how hard the rain falls. During monsoon season alone, Phoenix receives 33 percent of its annual rainfall, averaging 2.71 inches. To avoid floods, make sure you have sufficient drainage away from your deck construction, your home, and your pool equipment. A sloping grade is often used to do this, allowing water to flow naturally away from your home.

Swimming Pool Safety 

Focusing on storm cleanup is critical…for us. It’s playtime for your kids. Monsoons can leave a large mess to clean up, which will demand your full attention and time. Always keep an eye on the most important things in your life by keeping a close eye on your children when they are near your pool. To avoid accidents and injury, make sure to clear out all debris before letting them use the pool

Make sure your pool is swim-ready — Contact Leak Science Today!

Remember, swimming pools are a lot of fun! We enjoy a longer swimming season in Arizona than most other states do. It can be aggravating to deal with the aftermath of a monsoon storm, but it’s worth it to be able to relax in the pool. If you can take the precautions we mentioned above before a storm strikes, cleaning up should be a breeze!

Summertime storms can damage your pool. If that happens and your pool develops a leak, contact Leak Science right away. We offer professional pool services during Monsoon season and throughout the year to ensure that your pool remains algae-free and as clean as possible. Plus, we can locate and repair leaks so you can get back to enjoying the water. Our team of professionals will come to your home to ensure that your pool is ready for you to use, so you don’t have to waste time conducting pool maintenance. Call us at 480-794-0959; we are happy to help maintain your pool!

 

Get a free estimate

No Fields Found.
Still Have Questions?
Call us 480-794-0959
LeakScience Rated 5 / 5 based on 5 reviews.